Wednesday, January 10, 2018

100G Lambda MSA releases preliminary PAM4 spec

The 100G Lambda Multi-Source Agreement (MSA) Group, which was formed just in October 2017, released preliminary specifications based on 100 Gbps per wavelength PAM4 optical technology.

The new interfaces defined by the 100G Lambda MSA increase the distances supported for 100 GbE and 400 GbE applications compared to the 100 Gbps (100GBASE-DR) and 400 Gbps (400GBASE-DR4) 500-meter reach interfaces currently being defined by IEEE 802.3 Ethernet. The 100G Lambda MSA has developed optical specifications for 100 GbE with reaches of 2 and 10 kilometers and for 400 GbE with a reach of 2 kilometers over duplex single-mode fiber. By focusing on 100 Gbps per wavelength, the 100G Lambda MSA is enabling a technology ecosystem for next-generation networking equipment.

Members of the 100G Lambda MSA Group include Alibaba, Applied OptoElectronics, Arista Networks, Broadcom, Ciena, Cisco, Finisar, Foxconn Interconnect Technology, Inphi, Intel, Juniper Networks, Lumentum, Luxtera, MACOM, MaxLinear, Microsoft, Molex, NeoPhotonics, Nokia, Oclaro, Semtech, Source Photonics, and Sumitomo Electric.

The 100G Lambda MSA preliminary specifications are available for download at www.100GLambda.com

Molex intros 10G Automotive Ethernet Network

Molex introduced its 10G Automotive Ethernet Network for connected and autonomous vehicles.

The Molex 10 Gbps Automotive Ethernet Network connects Electronic Control Units (ECUs) throughout a vehicle. It offers secure over-the-air software and firmware updates and diagnostics over IP (DoIP) to help avoid the need for vehicle recalls and enabling in-vehicle security and diagnostics over IP.  Molex said its platform is compatible with existing network components provides OEMs the design flexibility to accommodate different vehicle profiles and integrate evolving new technologies.

Aquantia partnership - The Molex 10 Gbps Automotive Ethernet Network incorporates an Aquantia chip optimized for Multi-Gig Ethernet to support data transfers between Electronic Control Units (ECU).

“The collaboration with Aquantia supports fast, reliable connectivity to keep data flowing smoothly and securely within a vehicle and beyond to the cloud,” said Bill Fitzer, vice president and general manager, connected mobility solutions, ‎Molex. “Our 10 Gbps Ethernet platform delivers seamless end-to-end V2X connectivity and superior signal integrity in intelligent vehicles and autonomous driving.”

Excelfore partnership - Molex is working with Silicon Valley-based Excelfore, which provides innovative middleware solutions for in-vehicle and vehicle-to-cloud smart mobility networks. A demonstration at CES shows how Excelfore solutions integrated with the Molex 10 Gbps Ethernet Automotive Network enable over-the-air (OTA) diagnostics, firmware and software updates to different automotive devices, from different vendors, running different operating systems, across multiple networks.

AllGo Systems partnership - Molex and AllGo Systems have teamed up to develop advanced infotainment systems for intelligent connected vehicles. AllGo's OTG and Media Solutions support iPhones and Android phones, and distributed media playback to other smart devices within the car. At CES 2018, Molex and AllGo are demonstrating OTG Hubs and Media Modules incorporating AllGo solutions for wired and wireless infotainment in automotive cockpit systems. Demonstrations will include an OTG Hub running Apple CarPlay over USB, and Android Auto 8.0 and QNX on the head unit and digital instrument cluster. An OTG Hub and Adaptor enable the head unit to support CarPlay in either USB Device or Host mode. An AllGo Video Streaming Solution enables seamless media sharing between cluster, head unit and network storage device. High-resolution navigation data is streamed from the head unit running Android to a digital instrument cluster running QNX. Running in parallel, 4K high-resolution content is streamed from a network storage device to the head unit and played back on a secondary display.

Microchip partnership - Molex and Microchip Technology Inc. are collaborating on the development of integrated USB Media Modules and USB Power Delivery Solutions for automotive infotainment systems. The work focuses on the increasing number of USB ports in vehicles, and how USB can deliver more power and bring driver assistance applications to the head unit display.

Blackberry partnerhip - Molex is working to integrate BlackBerry's security solutions with its 10 Gbps Ethernet Automotive Networking platform. The collaboration leverages:

  • BlackBerry QNX Neutrino SDP 7.0 RTOS, which provides high performance and enhanced kernel-level security through an array of features including microkernel architecture, file encryption, adaptive time partitioning, a high-availability framework, anomaly detection, and multi-level policy-based access control. 
  • BlackBerry Certicom's Managed PKI (Public Key Infrastructure) Service, to securely provision, authenticate, and communicate between modules and other vehicle ECUs and peripheral devices connected to the network. In-vehicle connections can be made via Ethernet IP-based devices or LIN, CAN, USB, and other supported legacy communication protocols. As part of the PKI, BlackBerry Certicom is providing an efficient and powerful Elliptic-Curve Cryptography (ECC) solution that can also be extended to communications between the vehicle systems and the cloud.


CommScope and OFS sign 8-year fiber supply deal

OFS and CommScope a new eight-year deal under which OFS will supply optical fiber to CommScope for use in its customers’ networks. Financial terms were not disclosed.

“Through this agreement, CommScope secures access to a premier supply of optical fiber for development of innovative fiber cabling products for global wireline and wireless networks,” said Jaxon Lang, senior vice president and Connectivity Solutions segment leader, CommScope.

"OFS values our long-standing partnership with CommScope and supports their global operations with a multi-sourced contract from our optical fiber facilities in the United States, Europe and Japan,” stated Pierre Marty, senior vice president, Global Marketing and Sales at OFS.

Cisco offers flexible DOCSIS licensing to MSO customers

Cisco is introducing a DOCSIS licensing plan for cable operator customers using its Converged Broadband Router (cBR-8) platform.

Unlike traditional licensing models for converged cable access platform (CCAP) devices, which require cable operators to purchase large numbers of new bandwidth licenses for every service group where they want to offer the expanded service, Cisco's new pricing plan has only one license type based on bandwidth consumption.  This enables cable operators to provision all of the capacity of their CCAP platforms without restrictions or upfront licensing expense.

Cisco said the new licensing plan, which it calls Infinite Broadband Unlocked (IBU), is aligned to the number of subscribers across the network, so license investment is highly aligned to revenues and avoids stranded capital.

“IBU helps cable operators be more competitive and gain subscriber market share,” said Sean Welch, vice president and general manager, Cable Access, Service Provider Business, Cisco. “We have listened carefully to our customers, and with this new offer we have specifically focused on making DOCSIS licensing simple and aligned with their business objectives.”

Tele2 to acquire Com Hem creating no.2 mobile + broadband in Sweden

Tele2 and Com Hem agreed to a merger that will create the second largest mobile telephony and fixed broadband provider in Sweden and the market leader in digital TV, behind Telia. Com Hem’s shareholders will receive as merger consideration SEK 37.02 in cash plus 1.0374x new B shares in Tele2 for each share in Com Hem. This values the deal at about US$3.3 billion.

Com Hem operates a fiber-coax network serving approximately 1.5 million residential customers across Sweden. The company was established in 1983 and has approximately 1,200 employees. Its head office is in Stockholm.

Tele2, which was established in 1993 and is based in the Kista Science City, Stockholm, Sweden, operates an extensive mobile network across Sweden and has interests in The Netherlands, Lithuania, Latvia, Estonia, Kazakhstan, Croatia, and Germany.

The combined company will have a customer base of 3.9 million mobile customers, 0.8 million broadband customers and 1.1 million digital TV customers in Sweden. Its 4G network will cover the entire country while its broadband network will cover almost 60 percent of Sweden’s households.

The companies cited total annual OPEX, CAPEX and revenue synergies estimated at around SEK 900 million to be achieved within five years. The preliminary combined net sales for the twelve months ended September 30, 2017 are approximately SEK 31.8 billion with an adjusted EBITDA of SEK 9.2 billion and OCF of SEK 6.1 billion, of which Sweden accounted for approximately SEK 22.8 billion of net sales, SEK 7.2 billion of adjusted EBITDA and SEK 5.2 billion of OCF.

Arctic Wolf raises $16M for Cyber Security Ops Center service

Arctic Wolf Networks, a start-up based in Sunnyvale, California with offices in Ontario, Canada, raised $16 million in new funding for its security operations center (SOC)-as-a-service.

The Arctic Wolf service provides a cloud-based security incident and event management (SIEM) application combined with a team of expert security engineers committed to the client's operational requirements.

"Security operations centers are an essential element of modern cybersecurity, and every company needs one,” said Brian NeSmith, CEO and co-founder of Arctic Wolf. “We are transforming how companies look at cybersecurity from a product-centric view to one focused on proactive detection and response. The new funding allows us to invest in key areas of the business and maintain our extraordinary growth trajectory.”

The new funding was led by Sonae Investment Management with participation from Lightspeed Venture Partners, Redpoint Ventures and Knollwood Investment Advisory.

  • Arctic Wolf is headed by Brian NeSmith, who previously was CEO of Blue Coat Systems. Before that, he was the CEO of Ipsilon Networks (acquired by Nokia). 

India's Idea Cellular upgrades optical network with ECI

Idea Cellular, the third largest mobile operator in India and sixth-ranked in the world, has selected ECI to upgrade its optical network.

Under the project, ECI’s access DWDM solution will be rolled out across more than half of the operators’ network. ECI said its solution will ensure maximum utilization of Idea’s existing infrastructure while creating a future-proof solution that already accounts for additional upgrades.

“Idea is a pan-India wireless broadband operator offering high-speed mobile internet and digital content services to our customers. ECI has long been our partner and has supported us in rolling out 3G/4G networks with optimum solutions. We will be able to enhance capacity and meet the ever-growing demand for data with the new solution,” stated Mr. Anil Tandan, Chief Technology Officer, Idea Cellular.

Mellanox exits 1550nm Silicon Photonics

Mellanox Technologies will discontinue its 1550nm silicon photonics development activities, effective immediately.

The company said the decision to exit this segment was based on sales performance and that the company will focus its efforts on delivering 200 Gbps and 400 Gbps cables and transceivers.

“The Mellanox Board of Directors and management team continually review our strategic priorities and investments to ensure they meet our future goals. We began our review of the silicon photonics business in May of 2017, but as the business did not become accretive as we had hoped, we decided to discontinue our 1550nm Silicon Photonics development activities,” said Eyal Waldman, president and CEO of Mellanox Technologies. “We appreciate all of the efforts of the silicon photonics team over the years and wish them success in their future endeavors.”

Mellanox will incur an estimated aggregate charge of $21 million to $24 million, including approximately $4 million to $5 million of cash expenditures – mostly related to the severance costs of a reduction in force of about 100 people – as well as approximately $17 million to $19 million of other charges, consisting primarily of non-cash items.

The company does not expect an impact on fiscal 2018 revenues.

No impact is expected for its Variable Optical Attenuators (VOA) product and Mellanox will continue to sell to and support its VOA customers.


Telenor updates optical core with Nokia

Telenor selected Nokia as its sole supplier for the replacement of its legacy optical backbone network in Norway and Sweden.

The upgrade replaces the current optical core network connecting major centers across Norway and Sweden with coherent optical transmission based on Nokia equipment, including its 1830 Photonic Service Switch. Financial terms were not disclosed.

The next-generation optical network will feature advanced wavelength routing (CDC-F) for greater flexibility and dynamic network management and automation. Nokia said the new network offers an SDN-ready platform for automating, optimizing and assuring network services.

IoT M2M Council adds vendors to its RFP template

The IoT M2M Council (IMC) announced the additions of HPE, PTC, and Wind River (Intel) to its fledgling template RFP Program for IoT Software Platforms.

Using input from many vendors and more than 100 software buyers in an open-source process,

The IMC's template reference document is aimed at simplifying the sourcing of IoT software, and later, hardware and connectivity solutions. The program provides reference documentation of established software platforms. For participating vendors, the RFP template is expected to shorten the sales cycle.

“No other industry group or major consultancy is talking to buyers at scale and looking at the actual IoT sales process. My staff spends a lot of time responding to RFPs. The IMC’s RFP program gives us a report from a credible third-party that allows us to respond to RFPs more quickly, as well as a place to send potential buyers where they can access a template RFP document and learn more. If this program reduces my sales cycle, even just incrementally, it will be well worth it,” says Volkhard Bregulla, VP of Global Industries, Manufacturing, & Distribution at HPE, with a seat on the IMC board.

Germany's Unitymedia upgrades with Ciena

Unitymedia, a second largest cable operator in Germany and a subsidiary of Liberty Global, has selected to upgrade its optical backbone. As of September 30, 2017, Unitymedia had 7.2 million customers, of which 6.4 million are TV subscriptions, 3.4 million Internet and 3.2 million telephony subscriptions (RGU).

With this upgrade, Unitymedia is adding flexible grid capabilities and leveraging Ciena’s WaveLogic Ai solution to overcome data center complexities and reduce operational expenses.

Ciena said the higher channel capacities offered with WaveLogic Ai, up to 400Gb/s on a single wavelength, enables Unitymedia to offer new high capacity bandwidth services, deliver up to four times the bandwidth within the same infrastructure and site environment while reducing the cost per bit. Unitymedia will also use a number of services from Ciena’s Specialist Services Portfolio, such as installation, operation, and testing.

NETSCOUT trims financial guidance citing constrained SP spending

Citing tightened service provider capital spending in North America, NETSCOUT announced disappointing preliminary financial results for its third quarter of fiscal year 2018 ended December 31, 2017 and trimmed its outlook for the full fiscal year.

NETSCOUT expects third-quarter fiscal year 2018 GAAP revenue in the range of approximately $267 million and $271 million with non-GAAP third-quarter revenue anticipated to be in the range of approximately $270 million to $274 million. NETSCOUT’s GAAP net income for the third quarter of fiscal year 2018 is anticipated to range to between $87 million and $90 million, or $0.99 per share (diluted) and $1.02 per share diluted. NETSCOUT’s non-GAAP net income for the third quarter of fiscal year 2018 is anticipated to range to between $58 million and $61 million, or $0.66 per share (diluted) and $0.69 per share (diluted).

Anil Singhal, NETSCOUT’s president and CEO, stated, “As we have previously disclosed, we were optimistic that we could offset the anticipated, substantial decline in spending by our largest tier-one service provider customer with a strong second half of the year aided in large part by modest expansion across our other service provider customers and solid growth in our enterprise customer segment. However, we are unable to achieve our targets as service provider capital spending in North America remains under significant pressure, we experience lengthening enterprise sales cycles as our customers grapple with major digital transformation initiatives and related changes to their technology architectures, and we face funding delays for multiple large federal government projects. These dynamics, among others, impacted third-quarter revenue and we expect that to extend into our fourth quarter. Although we have taken certain one-time actions that will reduce our overall third-quarter cost structure by approximately $25 million, primarily through adjustments in variable incentive compensation, the magnitude of the anticipated top-line shortfall will have a tangible impact on our full-year operating profitability and earnings per share performance.”

NETSCOUT also announced that it plans to enter into accelerated share repurchase agreements.

Tuesday, January 9, 2018

HAVFRUE subsea cable to link NJ and Denmark with 108 Tbps capacity

TE SubCom will serve as the system supplier for HAFVRUE, a new subsea cable that will link New Jersey to the Jutland Peninsula of Denmark with a branch landing in County Mayo, Ireland. Optional branch extensions to Northern and Southern Norway are also included in the design.

The HAVFRU system will be owned and operated by multiple parties, including Aqua Comms, Bulk Infrastructure, Facebook, and others. Aqua Comms, the Irish cable owner/operator and carriers’ carrier, will serve as the system operator and landing party in U.S.A., Ireland, and Denmark. Bulk Infrastructure of Norway will be the owner and landing party for the Norwegian branch options.

The HAFVRUE subsea cable system will be optimized for coherent transmission and will offer a cross-sectional cable capacity of 108Tbps, scalable to higher capacities utilizing future generation SLTE technology. SubCom will incorporate their Wavelength Selective Switching Reconfigurable Optical Add Drop Multiplexer (WSS-ROADM) for flexible wavelength allocation over the system design life. It is the first new cable system in almost two decades that will traverse the North Atlantic to connect mainland Northern Europe to the U.S.A.

HAVFRUE is the Danish word for mermaid.

Preparation work is underway and system ready-for-service (RFS) is expected in Q4 2019.

“The HAVFRUE cable will provide state-of-the-art connectivity for increasing needs of users, ranging from individual consumers to businesses and the research community. SubCom is proud to be selected as the supplier for this project,” said Sanjay Chowbey, president of TE SubCom.


  • In September 2017, construction was completed on the 6,600 km MAREA subsea cable, which was jointly funded by Microsoft and Facebook. MAREA links Virginia Beach, Virginia to Bilbao, Spain. The cable will be managed by Telxius, Telefónica’s new infrastructure company. The cable features eight fiber pairs and an initial estimated design capacity of 160 Tbps. MAREA takes a more southern route than other transatlantic cables, which mostly connect northern Europe to the New York/New Jersey region.

AT&T tests LTE-enabled structure monitoring for roads and railroads

AT&T is testing a structure monitoring solution to help improve the safety of our roadways and railways.

AT&T's Smart Cities Structure Monitoring will use LTE-enabled sensors to remotely monitor structural factors. The sensors, which measure things like cracks and tilts, also feature alert triggers and email alerts to capture significant events.

“Safety is a top concern of citizens and cities alike. This concern extends beyond the realm of crime and natural disasters. It also includes the safety of our infrastructure,” said Mike Zeto, general manager, AT&T Smart Cities.  “We’re pleased to test this solution, which will allow for smart infrastructure analysis and monitoring.

AT&T also provided the following update on its Smart Cities initiative:

Atlanta: The City of Atlanta is using AT&T Digital Infrastructure with Current, powered by GE’s CityIQ, to transform existing lighting infrastructure into a sensor-enabled data network that will accelerate the digital era of urban development.  To date, two hundred sensors have been added to previously installed LED streetlights. The sensors can be used for traffic flow, parking optimization and gunshot detection, and create a platform for citizen engagement.

Dallas: AT&T is working with the Dallas Innovation Alliance (DIA) on challenges like sustainability and parking. To make the city’s historic West End more sustainable, the city installed 22 new smart lighting solutions using connected LED and intelligent controls. The new lighting used 35% less energy in its first 90 days.

Montgomery County: Wi-Fi was installed on targeted buses and bus shelters to inform the public about transit time delays in real-time.

Mexico: Mexico City’s Ministry of Economic Development (SEDECO) will work with AT&T on an IoT pilot as part of a “Program to Promote and Improve Public Markets in Mexico City.”

NYT: AT&T Drops Huawei’s New Smartphone Amid Security Worries

AT&T suddenly dropped plans to sell Huawei's latest Mate 10 smartphone amid security concerns and/or political pressure from Washington, according to reporting by The New York Times and The Wall Street Journal.

Huawei's new Mate 10 is a flagship smartphone with specs with a new Kirin 970 processor based on TSMC's  10nm semiconductor manufacturing process, an octa-core ARM Cortex CPU, a first-to-market Mali-G72 12-core GPU, and a dedicated Neural Network Processing Unit (NPU) for augmented reality apps. It comes with dual 4G SIM support and dual VoLTE connections.

FT: Australia blocks Huawei Marine from Solomon Islands subsea cable project

The Australian intelligence service has blocked Huawei Marine from its role in funding and constructing a high-capacity subsea cable that is to link Sydney to the Solomon Islands, according to the Financial Times. Instead, the Australian government will fund the A$100m (US$78m) project itself.

Huawei Marine Networks, which is based in Tianjin, China with manufacturing in Dongguan, China, and R&D institutes in Beijing as well as in Chelmsford, UK, is a joint venture established by Huawei Technologies Co., Ltd. and Global Marine Systems Limited.

https://www.ft.com/content/96513f58-d959-11e7-a039-c64b1c09b482


  • In July, Huawei Marine announced that it signed a contract with the Solomon Island Submarine Cable Company (SISCC) to construct the first submarine cable in the Solomon Islands. The 4,000km subsea cable design called for a total capacity of 2.5 Tbps.

Altice restructuring spins out U.S. operations

Roughly 18 months after acquiring Cablevision Systems, the leading MSO in the NY metro region in a deal valued at $17.7 billion at the time, Altice N.V. announced a corporate restructuring centered on the separation of Altice USA from Altice Europe.

The separation is to be effected by a spin-off of Altice NV’s 67.2% interest in Altice USA through a distribution in kind to Altice NV shareholders.

Following the spinoff, the two companies will be led by separate management teams.

Patrick Drahi, founder of Altice, will retain control of both companies through Next2 and will serve as President of the Board of Altice Europe and Chairman of the Board of Altice USA.

In addition, Altice Europe will reorganize its structure comprising Altice France (including French Overseas Territories), Altice International and a newly formed Altice Pay TV subsidiary.

“The separation will allow both Altice Europe and Altice USA to focus on their respective operations and execute against their strategies, deliver value for shareholders, and realize their full potential. Both operations will have the fundamental Altice Model at their heart through my close personal involvement as well as that of the historic founding team," stated Patrick Drahi.

Interxion announces European data center expansions

Interxion announced new expansion projects in seven cities across Europe to meet rising demand. The expansion will be funded with cash and committed loans.

Highlights of the projects:

  • In Amsterdam, Interxion will complete the remaining four phases of AMS8, totaling approximately 5,300 square meters (sqm) of equipped space and 10 MW of customer-available power when fully built out. The first two phases are scheduled to open in 4Q 2018 and the final two phases are scheduled to open in 1Q 2019. CAPEX for the remaining phases of AMS8 is approximately €63 million. Interxion has also acquired approximately 22,000 sqm of land adjacent to AMS8.
  • In Paris, Interxion will complete its PAR7 data center by adding an additional 2,000 sqm of equipped space and 4 MW of customer available power as well as upgrading the existing PAR7 power infrastructure. CAPEX is approximately €44 million.
  • In Vienna, in addition to the 1,600 sqm currently under construction and scheduled to be delivered by 3Q 2018, Interxion will add a further approximately 2,000 sqm scheduled for delivery by 3Q 2019. CAPEX is approximately €40 million.
  • In Madrid, Interxion will construct its third data center in a single 2,500 sqm phase with 5 MW of customer available power when fully built out. MAD3 is close to Interxion’s existing campus on land that Interxion intends to purchase in 1Q 2018 and is expected to open in 2Q 2019. MAD3 will be connected redundantly to the existing and proprietary campus fiber ring, providing access to over 80 carriers, ISPs, CDNs, and the ESpanix and DE-CIX Internet exchanges. CAPEX associated with MAD3, including the property purchase, is expected to be approximately €44 million.
  • In Copenhagen, Interxion will expand CPH2, with 900 sqm scheduled to open in 2Q 2018 and 600 sqm in 1Q 2019. CAPEX is approximately €18 million.
  • In Stockholm, Interxion will expand STO5 in two phases that will add approximately 400 sqm in 2Q 2018 and 800 sqm in 1Q 2019. CAPEX is expected to be approximately €18 million.
  • In Brussels, Interxion will add BRU2 which includes approximately 1,000 sqm of equipped space and 1 MW of customer available power. The new facility is scheduled for availability in 1Q 2018, and connects directly via dedicated fiber to the existing facilities at BRU1, providing access to over 100 connectivity providers, and the BNIX, NL-ix, AMS-IX, LINX, and DE-CIX internet exchanges. CAPEX is approximately €3 million.
“The increased pace of cloud adoption combined with an improving economy in Europe continues to drive broad-based demand for our colocation services across our entire footprint,” said David Ruberg, Interxion’s Chief Executive Officer. “With continuing demand from multiple communities of interest, these investments will allow us to meet the needs of our expanding customer base by adding approximately 15,500 square metres of equipped space. When combined with previously announced expansion projects, Interxion now has active expansion projects across its entire 11 country footprint totalling over 33,000 square metres which will increase the Company’s equipped space by over 25% compared to the end of 3Q 2017.”

Ford partners with Qualcomm on C-V2X - cellular vehicle-to-everything

Qualcomm and Ford are collaborating on the development of advanced connectivity systems for vehicles using Cellular Vehicle-to-Everything (C-V2X) technology.

C-V2X is designed to allow vehicles to directly communicate with other vehicles, pedestrian devices, and roadside infrastructure, such as traffic signs and construction zones, without the involvement of a cellular network, or cellular network subscription.

C-V2X field validations are expected to begin in 1H 2018 in San Diego, along with additional trials in Detroit.

Qualcomm's first C-V2X chipset is expected to be commercially available the second half of 2018.

Qualcomm and Ford are also working on automotive telematics platforms with integrated Qualcomm Snapdragon LTE modems.

"Our goal is to provide the smartest and best connected, human-centered experiences for our customers around the world," said Don Butler, Ford Motor Company. "Ford and Qualcomm Technologies believes that C-V2X holds great potential for the cars of the future. We're excited to prove its ability to create a more connected environment where people can move more freely."

Cisco develops 1 Gbps in-vehicle network with Hyundai

Cisco has teamed up with Hyundai for the production of a hyperconnected car.

A key innovation is the use of a Software Defined Vehicle (SDV) architecture -- an in-vehicle, 1 Gbps Ethernet network with integrated, multi-layer security and allowing for sensor integration. It will also enable new, high-speed services through an integration layer between software and legacy hardware. The in-vehicle network w

The development of first-generation solutions to enable 1Gbps Ethernet. This will significantly increase the in-vehicle bandwidth. The solutions will provide flexibility, lower costs, and improved security. By enabling IP and Ethernet services, legacy buses and devices will work together with the new Ethernet attached devices and services.

Hyundai will feature this new in-vehicle network in their premium 2019 vehicles. 

Ruba Borno, Vice President, Growth Initiatives and Chief of Staff to CEO, Cisco: “Cisco is pleased to bring a standards-based approach in partnership with the automotive industry; one that will help accelerate innovation and increase the value to the consumer. By creating a flexible, scalable, and secure platform, we are allowing automotive companies to deliver better cars – faster.”