by Frank Yue,
Senior Technical Marketing Manager, F5 Networks
This surge in the number of automated devices connected to the Internet
will significantly impact service provider networks. M2M and automated products
behave very differently when compared to biologically driven devices. Mobile
service providers must take a close look at how these devices function and how
they interact with the Internet through their data connections as they continue
to build and update their advanced LTE mobile networks.
Until now, consumer driven connections through mobile phones, tablets, and
PCs have been the focus for the design and build of LTE networks. These devices
and connections consume large amounts of data as everyone's hunger for more
mobile content is sated. Although generally random, the connections are
statistically predictable. Service providers are using this predictability to ensure
that the networks they build can support the planned demand.
Not all connections are created
equal
M2M devices have an extremely different connection profile from non-M2M
devices. They are designed to send periodic updates with their current state
and other data. Although the amount of content is small, there is a specific
cadence to the process of delivering these updates. Currently, most service
providers’ networks are not designed to handle this regular connectivity.
In the 3GPP LTE network architecture, there are approximately 26(!) steps
for any user equipment (UE)—including IoT devices—to attach (register) to a
mobile network. When a device is idle for a period of time, it goes to sleep
and detaches itself from the network. The idle timer is usually fairly short
since the device is tying up precious radio bandwidth as long as it is attached
(registered). In order to re-attach, the device must go through those 26 steps
again.
A typical M2M device will send updates on a periodic interval such as every
minute, five minutes, or 15 minutes. In addition, these devices will often send
more comprehensive updates on a larger interval, often hourly or daily. For
instance, a wearable training device may send updates to the Internet every 5
minutes while a residential water meter will only send a daily message to
update the home’s water consumption.
All of these updates means there will inevitably be surges of registrations
and floods of small chunks of data on the mobile networks. The minute-by-minute
updates may lead to only small surges, but the more comprehensive updates (such
as hourly or daily) may cause far larger surges. So, the raw volume of data is
not the main issue; it is the number of connections and reconnections and the number
of devices that is the primary concern.
The mobile service provider is not ready to handle these “harmonic surges” in registrations and updates. When a device wants to send more data, it
will need to register to the network again. These surges in registration
messages can easily overload the Diameter signaling infrastructure.
Cloud technologies are not just
for the cloud
To properly and efficiently handle the connection and data patterns that
IoT creates, mobile service providers need networks that are agile and elastic
in order to create on-demand infrastructures that can support these surges. At
the same time, they want to avoid the expense of purchasing and maintaining
equipment that is unused except during these surge periods.
This is where service providers can leverage virtualized and cloud
technologies. Network Functions Virtualization (NFV) is the architecture that
can transform today’s physical networks into flexible and dynamic
infrastructures that run services in cloud environments. Cloud technologies are
designed to deliver the on-demand resourcing, or elasticity, that is necessary
to support traffic surges. This maps directly to the planned capabilities of
NFV.
An unspoken goal of NFV is to transform the mobile service provider’s core
network into a cloud-like environment with all the business and operational benefits
of an agile and virtualized infrastructure. To support the demands created by
the growth of IoT, the registration and policy infrastructure of the evolved
packet core (EPC) must be virtualized.
Note, however, that virtualization, in and of itself, does not deliver the
required elasticity. On-demand resourcing is only possible with the
abstraction, programmability, and orchestration of these virtualized services. The
detection of surge periods must be coordinated with the spinning up of the resources
required to meet the expected demand. After the flood of connections pass,
these resources must also be freed up to be available for other purposes.
“Harmony,” not “harmonics”
The potential for the IoT to overwhelm the mobile network infrastructure is
very real. And with the number and types of connected devices growing
exponentially, the hype for IoT continues unabated.
When it comes to building their infrastructures, mobile service providers
need to work closely with the key IoT standards bodies and manufacturers to
find common ground. If they do not address this growing type of connectivity, service
providers will experience a devastatingly similar situation to the harmonic
convergence of wind speed that caused the Tacoma Narrows Bridge to
collapse in 1940.
About the Author
Frank Yue is the Senior Technical Marketing Manager for the Service Provider business at F5 Networks. In this role, Yue is responsible for evangelizing F5’s technologies and products before they come to market.
Prior to joining F5, Yue was sales engineer at BreakingPoint Systems, selling application aware traffic and security simulation solutions for the service provider market. Yue also worked at Cloudshield Technologies supporting customized DPI solutions, and at Foundry Networks as a global overlay for the ServerIron application delivery controller and traffic management product line. Yue has a degree in Biology from the University of Pennsylvania.
About F5
F5 (NASDAQ: FFIV) provides solutions for an application world. F5 helps organizations seamlessly scale cloud, data center, telecommunications, and software defined networking (SDN) deployments to successfully deliver applications and services to anyone, anywhere, at any time. F5 solutions broaden the reach of IT through an open, extensible framework and a rich partner ecosystem of leading technology and orchestration vendors. This approach lets customers pursue the infrastructure model that best fits their needs over time. The world’s largest businesses, service providers, government entities, and consumer brands rely on F5 to stay ahead of cloud, security, and mobility trends. For more information, go to
f5.com.
Got an idea for a Blueprint column? We welcome your ideas on next gen network architecture.
See our guidelines.
Specifically, the Equinix Programmable Network is using the NETCONF and YANG capabilities in the Tail-f NCS offering to provider multi-vendor service orchestration. This enables Equinix to provide multi-cloud services in an agile and vendor-agnostic way, simplifying and accelerating cloud access for the enterprise.
At this week’s Mobile World Congress, Nokia Networks is showcasing its Liquid Applications’ throughput guidance for heling content providers to optimize their transmission policy to reflect dynamically changing network resources in real-time. The goal is to improve resource utilization in mobile operator's network. YouTube has successfully conducted lab tests of the throughput guidance technology, with initial results showing improvement in network utilization and application quality of experience.
At this week’s Mobile World Congress in Barcelona, Alcatel-Lucent is showcasing NFV-based virtualized radio access network technology in collaboration with Intel, China Mobile, and Telefónica.
Alcatel-Lucent introduced a “Wireless Unified Networks” strategy which blends the upload and download capabilities of Wi-Fi and cellular technologies to enable higher capacity and give subscribers a more consistent and higher-quality mobile voice, data and video experience in high-traffic or low-signal locations.
Cisco, Deutsche Telekom and Intel are launching Challenge Up!, a joint Internet of Things (IoT) accelerator for start-ups from the Europe, Middle East and Africa (EMEA) region. The program aims at helping innovative IoT startups go-to-market faster through joint projects, mentoring, high-value networking and corporate assets. Selected companies may also recieve strategic investment and support commercializing their product or service for global markets.
SAP and T-Systems introduced a connected logistics platform for processing large volumes of data from Internet of Things (#IoT) deployments.
