What’s hot at #OFC23?
New 100ZR OSFP28 pluggables will change the access and aggregation infrastructure.
Adtran’s Stephan Rettenberger explains.
What’s hot at #OFC23?
New 100ZR OSFP28 pluggables will change the access and aggregation infrastructure.
Adtran’s Stephan Rettenberger explains.
What's hot at #OFC23?
How about pushing optical transmission to the next level?
Fujitsu's Rich Colter gives us the update of Fujitsu's flagship 1FINITY Ultra Optical System.
What's hot at #OFC23? Forward Error Correction (FEC) becomes increasingly difficult as speed increases. So how does it work at 800G? AMD's Gilles Garcia provides a demo at this year's OFC in San Diego.
https://youtu.be/CriQPCwXEHs
At #OFC23, Broadcom announced sampling of its 5nm 100G/lane optical PAM-4 DSP PHY with integrated transimpedance amplifier (TIA) and laser driver.
The new BCM85812, which is optimized for 800G DR8, 2x400G FR4 and 800G AOC module applications, is based on the company’s existing 5nm 112G PAM-4 DSP platform.
Highlights
At OFC, Broadcom demonstrated the BCM85812 in an end-to-end link connecting two Tomahawk 5 (TH5) switches using Eoptolink’s 800G DR8 optical modules.
“This first-to-market highly integrated 5nm 100G/lane DSP PHY extends Broadcom’s optical PHY leadership and demonstrates our commitment to addressing the stringent low power requirements from hyperscale data center and cloud providers,” said Vijay Janapaty, vice president and general manager of the Physical Layer Products Division at Broadcom. “With our advancement in 200G/lane, Broadcom continues to lead the industry in developing next generation solutions for 51.2T and 102.T switch platforms.”
Keysight, in collaboration with the RISE Research Institutes of Sweden, KTH Royal Institute of Technology, and Riga Technical University (RTU), demonstrated the first 310 GBaud rates using on-off keying modulation and 160 GBaud rates using PAM6 modulation with direct detection system to support 1.6 Tbps applications.
The researchers focused on an approach using a low latency intensity modulation and direct detection (IM/DD) system with the highest baud rate possible. The demonstration used amplification-free, externally modulated laser optical links that reduce overall power consumption.
The demonstration was enabled by the new Keysight M8199B 256 GSa/s Arbitrary Waveform Generator that delivers 75 GHz bandwidth and 2.5 V output amplitude in combination with the 110 GHz Keysight UXR1104A Infiniium UXR-Series Oscilloscope.
Dr. Oskars Ozoliņš, RISE Research Institutes of Sweden, KTH and RTU, said: “Data center interconnects require simple and efficient solutions to reduce complexity. We demonstrated that using a simple solution such as an externally modulated laser with record baud rate for on-off keying, PAM4, and PAM16 is a very efficient solution for cost efficient links in data centers. With Keysight’s support we have been able to validate that our experiment works. Innovations like this are only possible when working side-by-side with partners like Keysight.”
Dr. Joachim Peerlings, Vice President of Network and Data Center Solutions at Keysight Technologies, said: “Keysight supports young talented researchers and is proud to contribute to the development of next generation datacom optical interfaces. Collaborations like this help to address the next leap in the technology wave.”
At #OFC23, MACOM introduced its 226Gbps per lane technology product family for enabling 1.6TB optical modules.
The product family includes MACOM transimpedance amplifiers MATA-40734 and MATA-40736, Externally Modulated Laser (EML) driver MAOM-011112 and photodiode MARP-BP112.
The TIAs allow for a data rate of up to 226.8Gbps per lane to support KP4 and IEEE concatenated Forward Error Correction (FEC) with 750um spacing to photodetectors to minimize channel-to-channel cross talk. TIAs for both wire-bonded and flip-chip applications are available.
The EML driver is a single-channel flip-chip device enabling ultra-low inductance interfaces for optimum performance and minimum size in an optical module design. Its high bandwidth and high swing can help deliver industry-leading optical performance.
The photodiode is also a flip-chip design with high responsivity and an integrated lens for improved alignment tolerance. It is available in both singlet and array form factor.
Asia Submarine-cable Express (ASE), a consortium subsea cable running a total of 8,148km between Japan to Hong Kong, Malaysia, the Philippines, and Singapore, is leveraging Ciena’s Waveserver 5 powered by WaveLogic 5 Extreme and an optical bypass, to enable a 193% improvement in its original design capacity.
Waveserver 5 also minimizes ASE’s rack space and reduces power consumption by 60% for a greener solution.
The ASE cable also utilizes Ciena’s 6500 Packet-Optical Platforms in a Submarine Line Terminal Equipment (SLTE) configuration and Manage, Control and Plan (MCP) domain controller. Ciena Services is providing consulting, systems integration, maintenance and network transformation services to the cable, a collaboration between the region’s telecommunication carriers—NTT Ltd Japan Corporation (NTT LJ), PLDT, StarHub and Telekom Malaysia.“With Asia a key hub for international business, intra-Asia cable routes are becoming increasingly congested. In this crowded playing field, we’ve teamed up with Ciena on upgrades designed to enhance the delivery capacity of our current cables. We are especially pleased to have greener, more sustainable ways of powering connectivity and reduce power consumption,” said Mr. Yoshio Sato, ASE MC Chairman.
“We have been working extensively with ASE to maximize its network assets across the last few upgrades. With WaveLogic 5 Extreme enabling 400GbE single-wave transport across any distance, ASE can scale its cable with less power and cost. Together with ASE, we are making continued progress toward a more ecofriendly, connected future without compromise,” said Mr. Jamie Jefferies, Vice President and General Manager, International, Ciena.
Credo is working with EFFECT Photonics on coherent Digital Signal Processor (DSP) merchant ICs.
The two companies will work together to develop new coherent DSP products featuring EFFECT Photonics’ coherent DSP technology and Forward Error Correction (FEC), combined with Credo’s high-speed SerDes, I/Os, Analog to Digital Converters (ADCs), and Digital to Analog Converters (DACs).
Credo will manufacture and manage the sales and supply channels of the co-developed merchant ICs, and provide complete design services and customer support.
The first products will target 100G ZR and 100G ZR+ applications. The products will work within the popular QSFP28 optical module’s ultralow 5W power envelope and extend network reach well beyond 80km to support advanced application requirements. These products will target new buildouts and the imminent 10G upgrade cycle to 100G for service providers, 5G telecom and fixed-access operators.
“Coherent technologies are gaining importance as they improve spectral efficiency and increase data throughput. Historically, coherent solutions have been mostly deployed for very long distances due to their high power and high cost,” said Scott Feller, Vice President of Marketing at Credo. “Our first collaboration with EFFECT Photonics will allow us to deliver capabilities that fit into the power envelopes of the most commonly used transceivers at a competitive price, providing our large volume customers with a refined solution that will seamlessly integrate into their existing access and edge infrastructure to address the dramatic bandwidth growth at the network edge.”
Highlights

Airspan Networks agreed to sell its Mimosa Networks business unit to Radisys Corporation (a wholly owned subsidiary of Jio Platforms), for US$ 60 million on a debt free, cash free basis.
Mimosa has a diverse portfolio of point-to-point and point-to-multi-point products based on WiFi 5 and the newer WiFi 6E technologies as well as related accessories, such as twist on antennas, PoE Injectors, etc. These solutions have use cases in the backhaul requirements for 5G and FTTX/ FWA rollouts. Jio has been a major customer of Mimosa.
Airspan acquired Mimosa in 2018. Mimosa’s product development, manufacturing, and sales teams of 56 employees will continue with Mimosa following the acquisition by Radisys. Airspan maintains a reseller channel for specific joint 4G/5G and FWA projects and will continue marketing Mimosa products to some of its customers following the acquisition. Mimosa revenues for 2022 were approximately $25 million.
Separately, Airspan said it will sharpen its focus as a pure-play in 4G/5G Open RAN and private networks. The company’s Board of Directors is evaluating strategic option as has hired PJT Partners to pursue various options to optimize shareholder value.
Airspan reports unaudited revenue for FY22 and 4Q22 of $167.3 million and $41.7 million as well as FY22 Gross Profit of $66.4 million (39.7% gross margin) and 4Q22 Gross Profit of $19.2 million (46.1% gross margin).
At #OFC23, Coherent demonstrated an optical transceiver module operating at 200 Gbps per optical lane and co-packaged optical (CPO) multimode optical engine operating at 50 Gbps NRZ.
Some highlights
“These demonstrations will showcase the state of the art in datacom transceiver technology as we approach the era of terabit transmission,” said Dr. Lee Xu, Executive Vice President, Datacom Transceivers. “Such advances are critical to sustain the accelerating growth of the cloud through power efficiencies and cost reductions at both the module and architecture level.”
At #OFC23, member of the Open ROADM Multi-Source Agreement (MSA) and demonstrating interoperability of optical network equipment elements at data rates up to 400G. Participants include AT&T, Ciena, Cisco-Acacia, Fujitsu, Infinera, Juniper, Lumentum, NEC, Nokia, NTT, Orange, and Ribbon in collaboration with the researchers at the OpNeAR laboratory of the University of Texas at Dallas and Politecnico di Milano.
The Open ROADM MSA defines interoperability specifications for disaggregated optical transport networks. These specifications, which also include YANG data models, address Reconfigurable Optical Add/Drop Multiplexers (ROADM), transponders, and pluggable optics. Multi-vendor Open ROADM compliant equipment can be integrated into the same network solution and controlled by the open source Transport PCE (TPCE) controller.
The optical network testbed makes use of interconnected Open ROADM compliant equipment including ROADM nodes, 100G flexponders, Optical Transport Network (OTN) switches, 100G transponders, 400G transponders, 200G/300G/400G muxponders, a 400G single-node 3R regenerator, and CFP2-DCO and QSFP-DD 400G pluggable devices.
Demonstrated functionalities will include interoperability of CFP2-DCO 400G devices from three Original Equipment Manufacturers (OEMs), an Open ROADM compliant 400G single-node 3R regenerator, an automated path restoration mechanism at the physical layer implemented in the open source TPCE controller, interoperability between CFP2-DCO and QSFP-DD 400G pluggable devices, an IPoverWDM architecture with routers hosting QSFP-DD 400G coherent pluggables supporting oFEC, and various multi-layer network monitoring techniques for both optical and data packet transport layers. These demonstrations will be carried out over a single testbed composed of multiple network elements provided by the participating OEMs.
The demonstration also marks the first showing of Open ROADM-compliant 400Gb/s transmission achieved via router-optimized QSFP-DD pluggables, which incorporate embedded amplification and tunable optical filtering to enable simple deployment over any type of ROADM line system. Optical signal Interoperability between CFP2-DCO 400G and QSFP-DD 400G will be showcased. With the ability to support all metro ROADM client performance requisites in the small QSFP-DD form factor, these technologies expand the range of Open ROADM applications to include converged IPoverWDM architectures, which Release 11.0 covers through an extension of both the device and service models to handle such use cases.
Two recently added functions to improve signal reliability in Open ROADM transport networks will also be demonstrated in the OFC’23 testbed. First, an Open ROADM-compliant 3R regenerator with a bidirectional single-node (all optical) design will be applied to a 400G signal routed through four ROADM sites in the testbed. In this single-node design, only network interfaces must be specified (e.g., OTSI, OTSI-group, OTUC4, and ODUC4 for 400G) to achieve reliable high-data rate connections over multi-hop and/or long-distance physical routes.
Second, the automated path restoration mechanism newly implemented in the open source Transport PCE (TPCE) controller will be applied to overcome unexpected quality degradations of a 400G service in the Open ROADM testbed. For any created wave service that is labeled as “restorable,” the open source TPCE controller triggers a restoration mechanism at the physical layer as soon as its signal is subjected to a severe power degradation (e.g., a fiber cut). Upon receiving a change notification of the ROADM degree optical transmission section (OTS) interface operational state, TPCE computes a new candidate path to circumvent the problematic degree and reroutes the wave service over that path.
“AT&T is actively deploying Open ROADM MSA compliant optical network equipment and plans to have more than 10 metro markets supporting 100G and 400G traffic by year end,” says John Gibbons, AVP, Packet Core and Optical Transport, AT&T. “For operators, the interoperability enabled by Open ROADM can encourage lower costs, accelerate technology introduction, help reduce life-cycle costs, and allow networks to remain viable longer. The Open ROADM MSA continues to lead the industry in introducing new interoperable capabilities, as demonstrated by the Open ROADM demo at OFC 2023.”
Sumitomo Electric Lightwave has agreed to manufacture US Conec's MMC connector and TMT ferrule components for next-generation, high-density, multi-fiber cabling solutions.
US Conec's MMC connector combines a novel, reduced footprint multi-fiber ferrule with a very small Form factor (VSFF) connector footprint which is 1/3 the size of the MPO format. This collaboration to deliver MMC solutions supports active hyper-scale data center cabling programs and ensures a robust supply chain for emerging and future optical link architectures. Initial deployments include 24F single-mode, low-loss MMC connectors."US Conec is a leader in the development of next generation VSFF multi-fiber connectivity, and we are pleased to partner with them to deliver connectivity solutions using their MMC connector, which is indispensable for building next-generation data centers. We will leverage our precision molding technology to produce and sell solutions utilizing MMC connectivity to help customers overcome their challenges for saving space and reducing installation time, thereby contributing to the realization of an advanced information society," said Yoshiyuki Suetsugu, Deputy General Manager, Info-communications Business Unit of Sumitomo Electric.
"We are excited to partner with Sumitomo Electric on next generation high density connectivity solutions with the MMC connector platform. Their long history as a premier MT ferrule maker makes Sumitomo Electric an excellent second source partner for TMT ferrules and MMC connector components. Combining Sumitomo Electric's proven high performance component background with state-of-the-art cable technology will help to ensure a robust supply chain for emerging fiber optic networks built with groundbreaking MMC based cabling solutions," said Joe Graham, President of US Conec.
VIAVI showcased its new High-Speed Ethernet (HSE) Platform, a multiport solution that complements the physical layer testing capabilities of the VIAVI ONT-800 Platform. The HSE provides IC, module and network systems companies with high-speed devices for testing up to 128 x 800G. It offers physical layer test features with advanced traffic generation and analysis to troubleshoot and test the functionality and performance of integrated circuits and pluggable interfaces along with switching and routing devices and networks.
VIAVI will also demonstrate the recently released 800G Ethernet Technology Consortium (ETC) capability of its ONT 800G FLEX XPM Module, supporting testing needs of hyperscalers, data centers and related applications. In addition to supporting the 800G ETC implementation, it also offers extensive Forward Error Correction (FEC) stress and validation tools critical to ASIC, FPGA and IP implementations. The VIAVI ONT 800G XPM also offers tools to validate potential draft IEEE 802.3df proposals.
"As the leader in optical network testing up to 1.6T, VIAVI continues to invest in helping its customers simplify the challenges and complications involved with testing at high Ethernet speeds," said Tom Fawcett, Senior Vice President and General Manager, Lab & Production, VIAVI. "Our ONT-800 platform now supports 800G ETC, providing a logical addition to our solid physical layer testing foundation as we move up the Ethernet stack to the new HSE solution."
A new line of VIAVI Loopback Adapters has also been introduced at OFC. VIAVI QSFP-DD800 Loopback Adapters enable network equipment vendors, IC designers, service providers, ICPs, contract manufacturers and FAE teams to develop, validate and produce Ethernet switches, routers and processors that use high-speed pluggable optics.
Jabil introduced a new Active Optical Cable (AOC) family suited for disaggregated data center and cloud environments.
The first product is available in two configurations:
Jabil’s first 800G AOC product will be available during the second half of 2023. Development is underway on 400G AOC products to extend the AOC product line while accommodating a wide range of applications.
“Jabil’s investments in key enabling technologies and world-class facilities are driving the availability of game-changing photonics solutions and capabilities,” said KW Hoo, vice president of the photonics business unit, Jabil. “With the introduction of our 800G AOC family, we meet immediate needs for low-cost, high-performance, short-distance interconnects. Jabil’s ability to push the boundaries of photonics technology is backed by strong product design, precision manufacturing, and packaging services that advance optical communications excellence on behalf of our global customers and valued partner ecosystem.”
At OFC23, Lumentum is demonstrating its line-up of tunable transceivers for edge and access applications:
"We are excited to introduce and demonstrate Lumentum's broad range of tunable transceiver modules at OFC," said Justin Abbott, Lumentum's Director of Product Line Management, Transmission. "With our latest products, we simplify, expand, and deliver cost-effective solutions essential for growth at the network edge, including for telecommunications carriers in the cable MSO and 5G space as they speed up connectivity in their deployments."
OpenLight demonstrated a 224G InP-based modulator available for Tower's PH18DA platform for datacom applications supporting 224G per wavelength
The new 224G modulator is integrated on a demonstration PIC with a heterogeneous integrated laser and other required silicon photonics components to enable a full transmitter.
"This new modulator doubles the speed of every PIC," said Dr. Adam Carter, Chief Executive Officer at OpenLight. "For instance, our 800G DR8 PIC which was recently announced can become a 1.6T PIC (8x200G). Alternatively, a 400G DR4 PIC can now deliver 800G with four lanes. Our latest offering allows datacom customers to not only prepare for the future, but also keep up with the growing need for increased connectivity speeds."
"Our partnership with OpenLight continues to augment capability offered to all our silicon photonics foundry customers," said Dr. Marco Racanelli, Senior Vice President and General Manager of Tower Semiconductor's Analog Business Unit. "OpenLight's technology through Tower Semiconductor allows customers to achieve 224G operation on a silicon photonics platform and achieve the same benefits offered by on-chip lasers and optical gain without the need for separate lasers and costly attachment methods."
"200G modulation is a key building block and critical path to the delivery of next generation Ethernet speeds based upon 200G/lane," said Jim Theodoras, Vice President of Research and Development at HGGenuine USA. "This is not just a 200G modulator, but one that is available in a hybrid photonic integrated circuit. Next generation Ethernet cannot be delivered at the power and densities being requested by datacom customers without photonic integrated circuits, and we are happy to partner with OpenLight on their industry leading PIC technology that will enable not just 1.6T today, but also 3.2T in the near future."
The Open XR Forum demonstrated long-haul point-to-point transmission between QSFP56-DD coherent transceivers over 1,400 km at 400 Gb/s using 16QAM modulation, as well as error-free performance at 300 Gb/s using 8QAM modulation over a span of 2,495 km.
The testing was conducted in conjunction with founding member Lumen Technologies using Infinera's ICE-XR 400G QSFP56-DD transceivers operating in third-party routers and transmitting over third-party line systems. The long-distance performance demonstrates the potential for pluggable transceivers to be used in DWDM long-haul and large metro networks. The integrated management features, which included in-band remote management and streaming telemetry, demonstrated transport functionality typically found in a transponder, but in the compact form of a pluggable transceiver. This management decoupling of key transceiver functions from host routing functions is a new and easily generalized method for integration and management of coherent transceivers in any host device, including routers, switches, and servers. The ability to separate management of IP and Optical functions better aligns with existing service provider operational models, helping resolve a key barrier for deployment of IP over DWDM.
The Open XR Forum said the demonstration is significant in two ways:
The details and results of this demonstration are available in an Open XR Forum report, P2P (Point-to-Point) Performance and Host Independent Management Proof of Concept Demonstration.
NTT Electronics is now sampling its 400G coherent co-packaged devic for 400ZR/ZR+ optical transceivers.
The new ExaLIGHT 400 consists of integrated dies of NTT Electronics’ ExaSPEED 400-R DSP and Silicon photonics based Coherent Optical Sub-Assembly (COSA 2.0) in a single package, which can be controlled by firmware for optimal performance. The package is non-hermetic and TEC-free and utilizes reflowable solder in BGA configuration to achieve 30% reduction in overall dimension compared to discreet design.
NTT Electronics says the new ExaLIGHT 400 CPD eliminates the complexity of PCB design for supporting high speed signals between discrete DSP and coherent optics and simplifies module development. Furthermore, it creates additional space inside a small form factor pluggable module which is essential to integrate EDFA for 0dBm output power applications. NTT Electronics is pleased to be collaborating with key industry interconnect and optical transceiver suppliers, as part of its role to support the development of this innovative technology.
“The Coherent co-packaged device is an attractive offering for us, as a pluggable module provider. Its compactness is beneficial for small form factor module designs, and we’re also able to achieve better production yields than discrete components. We believe these features of coherent co-packaged devices will help us further development of efficient coherent pluggable modules,” said Joseph Chon, Director of Coherent Technology & Product Line Management, Molex.
“Pluggable coherent module assembly can be greatly simplified by simply combining ExaLIGHT 400 CPD with tunable Lasers. Its compactness and unified software design kit (SDK) for both DSP and COSA greatly reduce our customer’s development time of coherent pluggable modules,” said Tatsuhito Suzuki, NTT Electronics Executive Vice President and General Manager of Broadband System & Device Business Group. “Coherent CPD technology is a significant milestone for development of coherent pluggable modules. NTT Electronics continues to provide innovative solutions for key components to our valued partners”, he added.
Eoptolink Technology introduced multimode BIDI transceivers: 800G SR4.2, 400G SR4.2 and 100G SR1.2. The 800G and 400G versions are available in both OSFP and QSFP-DD800 form factors.
The 800G SR4.2 transceiver uses 850nm and 910nm VCSELs with 106Gbps wavelengths. Two wavelengths are combined bidirectionally onto a single fiber. The 800G SR4.2 uses 4+4 fibers in an MPO-12 connector interface. This enables a smooth upgrade path from 400G to 800G without the need to replace the fiber infrastructure.
The 400G SR4.2 transceiver operates at 53Gbps wavelengths and follows the same architecture of the 800G SR4.2. It can be configured for 400G point to point connectivity or as 400G to 4x100G with breakout connectivity. Both 100G MM bidi modules and 100G SR1.2 legacy modules based on IEEE KP4 FEC are supported in the 4x100G breakout application.
The 100G SR1.2 modules use a QSFP28 form-factor with duplex LC interface. The 850nm and 910nm wavelengths are combined onto a single fiber to guarantee interoperability with the 400G SR4.2 modules. The line side FEC follows the IEEE KP4 FEC.
"Our customers have reached out to us and asked us to develop these modules," explains Sean Davies, Eoptolinks VP Sales, "By introducing multimode BIDI optical transceivers capable of supporting 800G, 400G, and 100G, we have enhanced our comprehensive line of Multi-Mode transceivers and AOC cables supporting data rates from 10G to 800G."
MACOM Technology Solutions has acquired Linearizer Communications Group for approximately $49 million.
Linearizer, which is based in Hamilton, New Jersey and was founded in 1991 by Dr. Allen Katz, pecializes in non-linear microwave predistortion for use in terrestrial, avionic and space-based applications and high-performance microwave photonic solutions for use in the industrial and defense markets. The Linearizer team uses proprietary design and manufacturing techniques to produce its high-performance components and subsystems. Linearizer has a long history of service to its loyal customer base, which is primarily in North America.“We are pleased to welcome Linearizer’s team into MACOM,” stated Stephen G. Daly, President and Chief Executive Officer, MACOM. “This acquisition strengthens MACOM’s component and subsystem design expertise in our target markets, which is in line with our long-term growth strategy.”
Dr. Allen Katz, Founder and President of Linearizer, stated, “We are thrilled to become part of MACOM. The synergy between our organizations is incredible. We look forward to executing a growth strategy utilizing the resources that MACOM can bring to bear.”
www.macom.com