H3C completed a massive test of its co-packaged optics (CPO) enabled Ethernet switch (H3C S9827) driving traffic across 64 800G ports.
The companies said the test results demonstrate that H3C's 800G CPO silicon photonic switch series has "excellent reliability and stability in key performance indicators such as overall switch capacity, full-port 100%-line speed forwarding, and transmission latency."
The test leveraged Spirent TestCenter 800G B2 Appliance, which offers an L1-L2 feature set combined with broad L3 protocol support over multi-rate 800G/400G/200G/100G/50G speeds, and enables testing of network switches and routers for benchmark performance and scale standards required by today's AI/ML datacenter operators. The B2 supports multi-rate interconnection with the switches via cables, optical fibers and other methods, and supports performance testing based on benchmark performance and routing switch protocol standards.
The H3C S9827 series is an 800G data center switch based on CPO silicon photonics technology. It has a total switching capacity of up to 51.2T, and all 64 ports achieve 100%-line speed forwarding under different traffic. Each port transmission rate can reach 800Gbps. The product integrates CPO silicon photonics technology, fully meets the high throughput demand of intelligent computing network, and is suitable for AIGC cluster or data center high-performance core switching and other business scenarios.
The companies note that in actual operation, a 1% packet loss rate in Ethernet will lead to a 50% performance loss in the computing cluster.
After testing, the single-port transmission average delay of H3C 800G CPO silicon photonic switch is 1.085 microseconds, 20% lower than the previous generation product. The product uses CPO opto-electronic encapsulation technology to significantly shorten the high-frequency electrical signal interconnection distance from the switch chip to the optical module, helping to increase GPU computing efficiency by 25% within a single AIGC cluster.
"We were pleased to support H3C in verifying multiple breakthrough technology solutions for 800G Ethernet," said Andrew Liu, VP of Sales for Spirent in Greater China. "We have developed a comprehensive, end-to-end 800G testing suite that leverages decades of experience in Ethernet testing. This latest positive 800G test validating the reliability and high performance of H3C S9827, H3C's 800G CPO silicon photonic switch series, will help ensure successful deployments of this complex new technology and reliable high-speed networks to meet future demand."
Yutao Li, Vice President of Network Product Line of H3C and General Manager of Switch Product Line, said that "The 800G high-performance switch, bolstered by CPO technology, will provide higher network capacity for cutting-edge applications such as AIGC and large-scale model training, paving the way for further improvement in the scale and computing power of computing clusters. This joint test fully reflects H3C's leading technical strength in the field of digital infrastructure. In the future, H3C will also help customers from various industries to comprehensively boost Ethernet performance, fully unleashing the value of computing power."
