Wednesday, December 12, 2018

ECI intros 1.2T Dual Channel Blade for its Apollo DWDM transport

ECI introduced its TM1200, a 1.2T blade (dual 600G channel) for its Apollo DWDM transport systems, enabling programmable, adaptive optical networking.


ECI said its new TM1200 blade delivers unmatched spectral efficiency and elasticity through software controllable continuous modulation. Whereas traditional line-side modulation was only programmable in large increments – such as 100G, 200G or 400G – often relying on different line cards, the new TM1200 delivers software-controlled continuous modulation in 50 Gbps increments up to 600 Gbps line rate, rather than supporting specific modulation schemes. This maximizes capacity in a granular manner to best match client needs and variable channel conditions.

Additional benefits:

  • Optimal return on fiber investment: By operating at the edge of the Shannon limit, the TM1200 squeezes the maximum capacity from each channel on a fiber, delaying the need to add new fiber and optical networking infrastructure.
  • Enables a highly adaptive and flexible optical layer: Working in conjunction with ECI's colorless, directionless, contentionless, flexible spectrum ROADMs, and client services aware SDN control, the TM1200 can continuously optimize client traffic to fiber capacity.
  • Dynamic restoration: Excess capacity can be allocated dynamically to fully or partially restore client services that are disrupted by fiber or equipment failures elsewhere in the network.
  • Power efficiency: At a 600 Gbps line rate, the ECI TM1200 has a 10-fold improvement in power efficiency compared to other solutions, consuming less than 0.18W per Gbps, fully populated.

“Optical networks are evolving to be intelligent, agile and self-adjusting, and play an integral role in building the necessary infrastructure to handle the increased demand on global networks. Service providers are looking for networking solutions that can be acutely responsive to evolving customer demands and fluctuating business needs – beyond what they can predict,” said Jimmy Mizrahi,
executive vice president, Global Portfolio at ECI.


ECOC 2018: Acacia presents 600G Coherent Transmission

At the European Conference on Optical Communications (ECOC) in Rome, Acacia Communications demonstrated its AC1200 coherent module with dual-core design enabling 1.2 Tbps error-free transmission over fiber with 600 Gbps per wavelength.

The Acacia AC1200 module supports transmission capacity of up to 1.2 Tbps in a footprint that is 40 percent less than the size of the 5” x 7” modules that support transmission speeds of 400 Gbps today.

The module is based on Acacia’s Pico DSP ASIC, which utilizes two wavelengths that can be configured to support from 100 Gbps to 600 Gbps capacity each. The Acacia AC1200 supports a suite of advanced three-dimensional (3D) shaping features that may be optimized to enable performance approaching theoretical limits on a wide range of network configurations.

Acacia shipped its first AC1200 module customer samples in March 2018 and anticipates production to begin by the end of 2018.

MEF18 PoC - MEF 3.0 Service Spanning Four Operators



MEF18 Proof of Concept, 29 - 31 Oct - Fulfillment and Activation of an Intercontinental MEF 3.0 Service Spanning Four Operators. PoC Participants: Tata Communications, Sparkle, Equinix, Liquid Telecom, ECI, Amartus, and Spirent.